드릴프레스

드릴프레스 테이블

by 기타치는목수 posted Jul 02, 2022
?

단축키

Prev이전 문서

Next다음 문서

ESC닫기

크게 작게 위로 아래로 댓글로 가기 인쇄

많은 목공인들이 드릴프레스 지그를 사용할텐데요.

지그의 필요성은 여러번 강조해도 지나치지 않는 것 같습니다.

단순히 작업의 효율만 높이는게 아니라 안전도 함께 생각해야하기 때문입니다.

평범한 지그일 수 도 있지만 후반분에 청소기를 이용한 스핀들 샌더 역할은 참고할만 합니다.

 

Woodworking Drill Press Table

An adjustable fence, versatile clamping options, and a built-in dust collection system make this table a great upgrade.

드릴프레스 테이블
조정 가능한 펜스, 다양한 클램핑 옵션 및 내장형 집진 시스템으로 드릴프레스 테이블을 업그레이드할 수 있습니다.

 

 

photo-large-hd.jpg

A drill press can deliver precisely placed and perfectly straight holes. But the standard, cast iron table won’t support anything but the smallest workpiece. Then, trying to clamp a workpiece in place can be a frustrating exercise. And you can forget about dust collection. The table and fence system you see here solves all these problems. It turns your drill press into a precision woodworking tool. One of the best features is dust collection. The fence and inserts work together to funnel most of the dust away through a hidden chute. (This is especially handy when using a drum sander.) Clamping a workpiece couldn’t be easier. You can use the T-track to install hold-downs. And the large, open slots in the table make it easy to reach any size workpiece with a standard bar clamp. The final touch is a storage drawer. It’s just one more reason this project is worth building.

드릴프레스는 정확하게 배치되고 완벽하게 직선인 구멍을 가공합니다. 그러나 기본 주철 테이블은 작은 부재 외에는 아무것도 지지하지 않습니다. 그래서, 부재를 테이블에 고정하려고 하는 것은 좌절스러운 일이 될 수 있습니다. 그리고 집진에 대해서도 잊을 수 있습니다. 여기에서 볼 수 있는 테이블 및 펜스 시스템은 이러한 모든 문제를 해결합니다. 드릴프레스를 정밀 목공 도구로 바꿔줍니다. 가장 좋은 기능 중 하나는 집진 기능입니다. 조기대와 인서트는 함께 작동하여 숨겨진 구멍를 통해 대부분의 먼지를 제거합니다. (스핀들 샌더로 사용할 때 특히 편리합니다.) 부재를 클램핑하는 것이 이보다 더 쉬울 수 없습니다. T-트랙을 사용하여 홀드다운을 설치할 수 있습니다. 또한 테이블에 있는 슬롯을 통해 표준 바 클램프로 모든 크기의 클램프로 부재를 고정할 수 있습니다. 마지막 터치는 수납 서랍입니다. 이 프로젝트를 구축할 가치가 있는 또 하나의 이유입니다.

 

 

diagram.jpg

 

detail1-hd.jpg

 

detail2-hd.jpg